Paraffin waxesThe vast majority of candles produced nowadays are made, totally or partially, of paraffin.
The website of Exxon, one of the largest petrochemical companies, states the following about petroleum-derived waxes:
Any of a range of relatively high-molecular-weight hydrocarbons (approximately C16 to C50), solid at room temperature, derived from the higher-boiling petroleum fractions [...]There are three basic categories of petroleum-derived wax: paraffin (crystalline), microcrystalline and petrolatum.
Feel free to check out the complete technical characteristics of these categories. For the sake of this article, I'll highlight two important facts:
What the dictionnary says:
Paraffin: (derived from latin parum affinis, [little affinity])
When you buy paraffin wax to make candles, most of the time it is sold by weight and conditionned as wax pellets. Such a conditioning is ideal as it makes it easy for you to store, manipulate and proportion.
If you live in the United States, chances are you'll never use basic paraffin because there's a wide range of pre-blends available, specially formulated for a specific type of candle. But if you're a beginner, you can learn a lot by playing around with pure paraffin and additives as most european candlemakers have to, due to the unavailability of pre-blends in these countries.
Straight paraffin usually comes with a melting point (MP) of 140°F, which limits its use for "hard" candles like Pillars or Votives.
It comes free of any additive so the odds are great you'll need to add one or several additives, depending upon the type of candle you're planning to make.
But let's start with the beginning: straight paraffin wax is great for the beginner candlemaker and will allow you to familiarise yourself with the different additives, their effect when used in different quantities and also with the ideal pouring temperature in such or such case.
depending upon the type, between 122°F and 140°F (50°C and 60°C)
around 395°F (200°C)
around $1.29 / pound (volume discounts apply)